Common Senses about Climate Chambers
When installing the LENPURE climate Chamber, the climate Chamber shall be grounded, otherwise the risk of electric shock may occur due to leakage.
Don't run the climate test equipment and carry out the test until it is installed reliably.
When there are the heating samples placed in the climate Chamber, please employ the additional power supply instead of this machine power supply as the control power supply of the samples.
Due to a dangerous current produced in running process of the LENPURE climate Chamber, therefore, non-professional personnel do not open the cover plate of the electrical control box.
If the LENPURE climate Chamber is not equipped with the humidifying function, please pay attention to the different operation steps and requirements when reading the instructions.
During running, all kinds of motors and fans are under the control of the controller and activated according to the orders. Therefore, don't touch any component in the temporarily idle state so to prevent the component from starting up suddenly, which may cause personal injury. When you do need to work near the rotating parts, please cut off the main power switch and ensure the protective equipment in good condition.
Do not move the LENPURE climate Chamber when there is a sample in it, otherwise the sample may reverse or fall off.
The LENPURE climate Chamber must be installed horizontally; otherwise it will cause alarm or unstable humidity control.
Before use, make sure that the LENPURE climate Chamber is fixed, namely the caster is unearthed and adjustable feet are grounded, otherwise the LENPURE climate Chamber may move by accident under the effect of external force.
Please carefully read the safety requirements and safety signs on the climate test equipment before testing with the LENPURE climate Chamber.
