How to deal with small salt spray corrosion test chamber nozzle blockage
The salt spray corrosion test chamberis a test for the corrosion of auto parts such as hardware and metal. It can quickly detect how the product is corroded under temperature and humidity, and can effectively improve production efficiency.
It is inevitable that the salt spray box will have problems in the later stage of use, and there is a user reaction. For example, the filter is blocked during use.You can see the picture as below.
The problem often occurs in the equipment is that the nozzle is blocked and cannot be sprayed.The best way to do this is to soak the filter in acetic acid solution for 12 hours, then rinse off with water. The other reason for this is caused by the use of impure water during the experiment.
Experts suggest that you must use pure water or distilled water for testing. So as to avoid Blockage.
First, the failure of the solenoid valve, the failure of the pressure gauge or the pressure is too low, it is necessary to notify the maintenance company to go to the door for overhaul;
2. When the nozzle is clogged, it is necessary to carefully disassemble the nozzle for cleaning.
3.Third, the air compressor stops running, and the air compressor button is turned on;
3. The main switch of the air compressor outlet is not opened, and the main switch of the air compressor is turned on.
4.Note: The salt of the small salt spray corrosion test chamber needs to use industrial salt.
The edible salt contains impurities such as iodine. For water, pure water or distilled water without impurities is needed. The tap water contains impurities and easily blocks the pipeline.
For more details, please feel free to contact sales@lenpure.com
Please visit www.lenpure.com
