Home > News & Information > Lenpure News >

News & Information

Three kinds of sample placement methods of salt spray test chamber

Salt spray test mainly for metal products, from small accessories, screw nut to metal objects, different volume and size depends on different sample holder, Our salt spray test chamber sample holder: round bar, V-sample rack, and the baseplate. As follows:
 
 
1. Sample placement methods of round bar
 
Round bar material is stainless steel of internal material, external plating PET. If the chip sample we can be tiled on the round bar, and for small pieces, we can use nylon rope to hold the hanging round bar.
 
 
2. Sample placement methods of V-sample rack
 
It is PP board material, can do 15℃-30℃ tilt test. Place the test sample in a V-shaped sample holder, lean the round bar at 15 ° C, and remove a round bar at 30℃. The customer can adjust according to the requirements
 
 
3. Sample placement methods of baseplate
 
If the sample is heavy and≥15kg, can be placed directly at the baseplate.
 
Our test chamber can be load-bearing 32KG, if overweight, please inform the manufacturers to reinforcement treatment, To avoid transformation of the chamber in the future.