Condition 1：environmental condition
a. Temperature: 5℃～＋28℃
b. Humidity: ≤85%RH
c. Air Pressure:86kPa～106kPa
d. Flat floor
e. Good air ventilation
f. No fierce vibration
g. Not electromagnetic
h. No inflammable and explosive materials
i. No direct sunlight or other cold/heat source direct radiation;
j. There is no high concentration dust and corrosive substance
Condition 2：power supply condition
a、Voltage：220V±22V or 380V±38V,3P,(changeable as per your requirement)
b、HZ：50HZ±0.5HZ.
Condition 3：water supply condition
We recommend that Pure Water, Distilled Water, Deionized Wate.
Resistivity ≥ 500Ω.m
If you just have circulating water or tap water, it should meet this conditions:
a、Water temperature ：≤30℃;
b、Water press：0.1MPa～0.3MPa;
c、Water quality ：Meet the standard of industrial water。
Condition 4：load condition
The load of the test chamber should meet this conditions：
a、The total mass of the load is less than 80KG /m³of the test area
b、The total volume of the load is less than 3/5 of the volume of the chamber
c、In any section perpendicular to the prevailing wind direction, the sum of the load area should be no greater than 1/3 of the sectional area of the test area and the flow of airflow cannot be blocked when loaded.
