Home > News & Information > Lenpure News >

News & Information

How to Install Standard Climate Chambers [1/4]

LENPUER Climate Chambers Fixation and Installation of Caster
After unpacking the box, you should fix and install the Climate Chamber. When installing, you should make sure all sizes conform to the requirements of the installation space so as to guarantee enough space for maintenance and opening the door.
As for the initial installation, the Climate Chamber should be placed on a level ground and the chamber should be aligned well horizontally. If the Climate Climate Test Chamber does not remain level during running in the test, it may cause running failure.
The caster of the Climate Climate Test Chamber should be installed at the bottom of the chamber’s four corners and the adjustment methods of four corners.
Moving the Climate Climate Test Chamber: when you rotate the lift turn-plate clockwise, the fixed base will move up and leave the ground, while the movable roller moves down and when the roller lands on the ground, you can easily move the equipment to any desired location.
Fixing the Climate Test Chamber: After the chamber is moved to the desired location, adjust the lift turn-plate in anti-clockwise direction to lower the turn-plate and lift the movable roller until the fixed base contacts the ground so as to keep the chamber basically fixed. And then inspect whether the chamber is in level with a level gauge. Besides, you can adjust the heights of all parts of the chamber with the lift turn-plate and when the lift turn-plates of all parts reach the appropriate location and stop rotating, check and make sure that the Climate Test Chamber is in level.