Home > Products > Non-standard Chambers >

Constant temperature immersion water test Chambers


Apply to:Constant temperature immersion water test

Application:Shell,metal,bolts,automotive,electronics,and pharmaceutical

  • Feature
  • Specification

    Lenpure constant temperature immersion water test Chambers is necessary test equipment for automotive,aerospace,automotive,pharmaceutical,car industry etc, It is designed to detect the soaking performance of the paint film coating,The principle is that when the sample plate is soaked in deionized water at 40 ℃ for a while ,Check the foam density of the board and determine the adhesion of the film according to the test method of D251075.


    ●Modern attractive styling
    ●Custom Sizes Available
    ●Touch Screen Programmer
    ●User-Friendly Controls
    ●PP corrosion resistant interior
    ●Comprehensive safety features
    ●All circuits fused or circuit breaker protected.
    ●All wiring numbered or color coded
    ●Compressor overload protection

    Test Standards

    This test equipment conforms to following test standards (but not limited to):
    ●GJB 150.8-86
    ●GBT 10485-2007
    ●GB 5170.20-90
    ●GB 4208-93


    Sizes of immersion test Chambers
    Volume (L)
    Rated Power 
    Internal Dimension (mm) D*W*H
    External Dimension (mm) D*W*H
    yle="text-align: center;" x=""> 380*580*250
    As per design drawing
    Basic Specification
    Temperature Range  40℃±1℃
    Deionized water Conductivity < 2 x 105 Ω/cm
    Interior/ Exterior material Be made of imported reinforced hard PP plates with smooth and flat surface
    Pipe Reinforced fluorosilicone rubber tube
    Casters 4pcs, with PU covered for protection. Height adjustable and direction universal. 
    Control System
    breaker Schneider miniature circuit breaker
    Heater Stainless steel heater
    Temperature controller Korean SAMWONTECH ST190 meter
    Temperature Sensor PT100Ω armoured platinum resistor
    Standard Configuration Test Chamber x 1, Deionized water tank x 1,etc.
    Safety Protection Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection.
    Voltage AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement
    Ambient Enviromental for application 5°C~+30°C ≤ 85%R.H
    Test Standards (not limited to)