Inquiry +86 21 3409 6966 (Tel) +86 21 3409 7666 (Fax) Languages:(中文 / 日语 )   

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Go Home

Water Adding and Water Level Checking of the salt spray test Chamber


lHow  to Add Water into the salt spray corrosion chamber

1.  Before adding water to the salt fog test chamber, close all drain valves of the chamber.  

2.  Add purified water, distilled water or deionized water into the salt fog test chamber. If  water adding can make the black floating ball floating up in the chamber, then  it is enough (the black floating ball is the floating ball for water level  protection).

3.  The Proper amount of distilled water should be added to the water sealed sink  around the upper part of salt fog test chamber, but should neither be excessively full nor  be excessively less. The state in which the water immerses the rubber support  pad and the water and the salt fog do not overflow when the chamber cover is  closed is optimal.


lWater  Level Checking

Before  the test, it is necessary to add water to Salt Spray Nozzle Test chamber. Closing the drain valve  in the back of the chamber before adding water, then add purified water or  distilled water into the chamber. The volume of the water added that can float  the floating ball at the bottom of the right side of the chamber is the suitable  volume. When the machine is started, if low water level appears in the chamber,  please check whether the chamber is horizontal. The position of the  supplementary chamber should not be too high.

Add  enough distilled water or deionized water into the heating sink at the bottom of  the working chamber to prevent scales from gathering on the heating pipe in the  heating, and causing crack due to poor heat dissipation and final  damage.


lAdding Water into Salt Water Barrel

Prepare  salt solution according to 1:19 proportion, and then pour it into the salt water  barrel, the water used in preparing the solution must be purified water, and  foreign materials in the solution may influence the test result or block the  nozzle.


Home | Add to Favorites | Contact Webmaster | Copyright | Contact Us | Careers | Partners | About Us
Copyright(c) Shanghai Linpin 2011-2012 | Terms and Conditions | Privacy Policy 沪ICP备07003980号-1 沪网安备31011209000148号