| temperature range |
RT+10℃～80℃ |
| temperature deviation |
±1℃ (at no load) |
| temperature sensor |
PT100 Armored Platinum Resistors |
| Test plate holder |
Made of non-conductive material, it should be possible to keep the test plate at an angle of 15 to 20° to the vertical. The test surface of the test plate is upward and parallel to the direction of water flow |
| time setting |
1～9999 H、M、S(adjustable) |
| Outer case material |
All use high-quality (t = 1.2mm) A3 steel plate CNC machine processing molding, shell surface spraying treatment, more clean, beautiful |
| Inner box material |
Made of high quality stainless steel (SUS304) |
| Hose Material |
Thickened fluorosilicone rubber tubing is used, which can be maintained for 15 years without aging or cracking. |
| Water mixing systems |
Adopting pump circulation for mixing, to achieve the purpose of making the whole tank water are fully stirred. |
| water filler |
Sinks are equipped with automatic refill connections |
| monitor (computer) |
Korea Saintyear ST590 meter, digital display touch key, P.I.D microcomputer S.S.R temperature controller precision: 0.1 ℃ (display range) |
| temperature sensor |
Type K thermocouple temperature measurement body |
| control method |
Thermal balance temperature regulation method
Temperature control is coordinated by P.I.D + S.S.R system with the same channel.
With the function of automatic calculation, the temperature change conditions can be corrected immediately, so that the temperature control is more accurate and stable. |
Failure alarm and cause, processing prompt function
Power failure protection function
Calendar timing function (automatic start and automatic stop operation)
Self-diagnostic function |
| Heating method |
Heating for the inner liner sink-type heating, fast warming |
| Heating components |
The use of titanium alloy tube, built-in nickel-chromium alloy far-infrared heating core, rapid heating, temperature distribution uniformity |
| test box |
Over-temperature protection
Integral equipment timing |
| circuit system |
Schneider miniature circuit breaker (to prevent short circuit of control circuit)
Chamber over-temperature protection (to prevent over-temperature in the chamber and to protect the test article)
Chamber low water level protection (to prevent water shortage in the water tank) |
| other |
Leakage protection
Short circuit protection |
Note:
1、the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions
2、Can be customized according to the specific requirements of the user non-standard Waterproof test chamber etc
3、This technical information is subject to change without prior notice. |
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Ventilation Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber New energy battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Tiếng Việt
ภาษาไทย
پاکستانی زبان
