Intelligent salt spray test chamber-LINPIN INSTRUMENT

Product Features

A split structure can be adopted, with the refrigeration unit and the box placed separately;
The top of the box is perforated for easy lifting of the motor;
Box bottom has 4 support holes sealed with molded silicone plugs to prevent frost & water overflow.
The central axis adopts a special sealing device to avoid frosting at low temperatures;

Product Parameter

Model	Studio Size（DWH）mm	Dimension（DWH）mm
LRHS-108-RJY	450×600×400	780×1140×1050
LRHS-270-RJY	600×900×500	960×1460×1150
LRHS-412-RJY	750×1100×500	1100×1730×1240
LRHS-663-RJY	850×1300×600	1230×2150×1410
LRHS-816-RJY	850×1600×600	1230×2450×1460
LRHS-1080-RJY	900×2000×600	1280×2850×1460

Temperature range	RT+5℃～55℃
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃
Temperature fluctuation	±0.5℃
Salt spray deposition	1～2ml/80 cm².h（16 Hourly average）
Compressed air pressure	2.00±0.01（kg/cm²）
Spraying method	Continuous/Periodic Optional
Test time	1～9999 H、M、S（tunable）
Cycle time	1～99 H、M、S（tunable）
Specimen holder angle	Can meet 15°, 30° tilt test
Test Methods	NSS test, AASS test, CASS test
Case Material	Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet
Lid Material	Corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP reinforced rigid plastic sheet
Air-saturated drum	Imported high grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tube
Temperature Controller	Adopting Japan “UMC” brand temperature meter
Temperature Sensor	PT100 Platinum resistance thermometer
Heater	Titanium Heating Tube
Interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
Standard Configuration		V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
Safety		Overall equipment under-phase/reverse-phase, equipment timing, rapid fogging instructions, over-temperature, end of test, low water level protection, leakage, short-circuit
Supply Voltage		AC220V±10% 50HZ AC380V±10% 50Hz
Power		1.6kW/2.5kW/3.0kW/5.6kW/6.5kW/6.7kW
Operating environment		5℃～＋28℃ ≤85% RH
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the user’s specific test requirements of ice-covered test chamber, ice-covered test chamber, etc. 3、This technical information, subject to change without notice

Solution

Aerospace

Aerospace vehicles experience extreme temperatures, pressures, vibrations and other environmental conditions during flight. In order to ensure that they can work safely and reliably, material components need to be tested for reliability.

Semiconductor chip

Through the use of LINPIN environmental test equipment, we can comprehensively evaluate the performance of chips under various extreme environmental conditions to ensure that they maintain efficient and stable operation in practical applications. If there is a specific product or test demand, you can choose the appropriate test chamber program according to the actual situation of the customer.

Photovoltaic energy storage

With the rapid development of renewable energy sources, photovoltaic energy storage systems are playing an increasingly important role in the global energy market. These systems need to maintain efficient operation under various extreme environmental conditions. Therefore, environmental testing of PV energy storage systems has become critical. Environmental test chambers provide an ideal platform for simulating various environmental conditions to ensure the performance and durability of PV energy storage systems.

Consumer Electronics

LINPIN can provide the consumer electronics industry, including electronic components, assemblies, and all kinds of finished products, such as: cell phones, tablets, computers, all kinds of wearable devices and other related industry product testing solutions.

New energy vehicles

Automotive vehicle reliability test chamber is widely used in the automotive industry vehicle environment and automotive parts and components enterprises, measurement and testing organizations and scientific research units, etc., the chamber has a high-temperature test, low-temperature test, constant-temperature and constant-humidity test and other comprehensive test conditions, used to measure the performance of the automobile in different temperatures and humidity under the environmental conditions of the performance test, including the cold start, tailpipe emissions, demisting, defrosting test, and so on.