Sulfur dioxide test chamber-LINPIN INSTRUMENT

Product Features

A split structure can be adopted, with the refrigeration unit and the box placed separately;
The top of the box is perforated for easy lifting of the motor;
Box bottom has 4 support holes sealed with molded silicone plugs to prevent frost & water overflow.
The central axis adopts a special sealing device to avoid frosting at low temperatures;

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-297-RS02	600×550×900	1050×1130×1500
LRHS-605-RS02	850×750×950	1300×1330×1550
LRHS-900-RS02	1000×900×1000	1450×1480×1600

temperature range	RT＋10℃～50℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Humidity range	85～95%RH
Gas generation method	cylinder method
gas concentration	0.1 to 1.0% (% by volume)
Outer/inner case material	Corrosion-resistant, anti-aging, high-strength PP reinforced rigid plastic sheet
Door Material	Fully transparent high temperature resistant tempered glass, easy to observe the test samples during the test condition.
substructure	Silicone rubber sealing between lid and box body to prevent gas spillage
Heating method	Inner liner sink type heating method, fast warming, temperature distribution uniformity
Heating structure	Adoption of far-infrared nickel-chromium alloy high-speed heating electric heater
Temperature Controller	Intelligent XMT7512D Series
temperature sensor	PT100 platinum resistance temperature measurement body
standard configuration		1 set of sample holder, 1 sulfur dioxide cylinder
security protection		Leakage protection, short circuit protection, water shortage alarm, over-temperature protection, overall equipment timing
Supply Voltage		AC220V±10% 50±0.5Hz
Power		2.0kW	2.5kW	3.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1 、the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the user’s specific requirements of non-standard sulfur dioxide test chamber 3、This technical information, if there is any change without prior notice

Solution

Aerospace

Aerospace vehicles experience extreme temperatures, pressures, vibrations and other environmental conditions during flight. In order to ensure that they can work safely and reliably, material components need to be tested for reliability.

Semiconductor chip

Through the use of LINPIN environmental test equipment, we can comprehensively evaluate the performance of chips under various extreme environmental conditions to ensure that they maintain efficient and stable operation in practical applications. If there is a specific product or test demand, you can choose the appropriate test chamber program according to the actual situation of the customer.

Photovoltaic energy storage

With the rapid development of renewable energy sources, photovoltaic energy storage systems are playing an increasingly important role in the global energy market. These systems need to maintain efficient operation under various extreme environmental conditions. Therefore, environmental testing of PV energy storage systems has become critical. Environmental test chambers provide an ideal platform for simulating various environmental conditions to ensure the performance and durability of PV energy storage systems.

Consumer Electronics

LINPIN can provide the consumer electronics industry, including electronic components, assemblies, and all kinds of finished products, such as: cell phones, tablets, computers, all kinds of wearable devices and other related industry product testing solutions.

New energy vehicles

Automotive vehicle reliability test chamber is widely used in the automotive industry vehicle environment and automotive parts and components enterprises, measurement and testing organizations and scientific research units, etc., the chamber has a high-temperature test, low-temperature test, constant-temperature and constant-humidity test and other comprehensive test conditions, used to measure the performance of the automobile in different temperatures and humidity under the environmental conditions of the performance test, including the cold start, tailpipe emissions, demisting, defrosting test, and so on.