Search for the product you are looking for
Military Standard Rain Test Chamber

Military Standard Rain Test Chamber

Product Introduction
Military standard rain test chamber used for military equipment or electronic products in a variety of intensity rain environment simulation of dynamic operation, military equipment rain test method and the main parameters, in a test box can be realized in the wind source of rain test, drip test. Determine the military equipment or electronic products in the rain conditions, the ability of its shell seals to prevent rainwater infiltration and by the rain or after the work of the performance, to assess the waterproof quality of the product.

Service Hotline

4000-662-888
Product Features
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-1320-PL 1600mm×2500mm×3300 约2500mm×5100mm×3563
temperature range Water temperature +10°C
quantity of rainfall 10—15cm/h
raindrop diameter 0.5—4.5mm
Test wind speed Horizontal wind speed 10-18m/s adjustable
raindrop angle The raindrops have a horizontal direction to 45 ° angle change, and uniformly flutter on the side of the test piece
Intensive rainfall This procedure may be considered when testing large specimens where rainfall and rain blowing devices cannot be used.
quantity of rainfall 2800+30L/m2/h
Rain drops cannot be aggregated into a stream, and the dispenser distributes the drip holes in a matrix at 20-25.4mm intervals.
Rainfall distance The drip height should ensure that the final velocity of the water drop is 9m/s
Turntable size/carrying capacity Diameter: φ1000mm, Load: ≥50kg
Speed range 1~5r/min continuously adjustable
Workpiece size limitation Maximum allowable size of test piece: 1000mm×1000mm×1000mm
Outer case material High-quality library boards
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam
drip tray Imported high-grade stainless steel SUS304 + aluminum plywood + aluminum profile
Controller Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
Heating systems Nichrome wire heaters
temperature sensor High Accuracy Pt100 Platinum Resistance Temperature Sensors
Wind Speed Sensor Differential pressure air velocity sensor, 4-20mA output
security protection Fan, motor, pump overcurrent overload protection, limit, undervoltage, short circuit, phase loss, over temperature, leakage protection
Supply Voltage AC380V±10% 50Hz
Supply Voltage AC380V±10% 50Hz
Power 24.5kW

 

Product Recommendation
Industry News
Customers familiar with high-low temperature humidity test chambers know that the equipment is equipped with observation windows, allowing them to monitor the progress and changes during testing.
The entire testing process of a salt spray test chamber is relatively straightforward, and with technological advancements, the operation has become even simpler and more intelligent.
After prolonged use of a temperature and humidity test chamber, certain components or systems may develop issues, such as sediment buildup in the water system. To ensure accurate test results, regular cleaning of the water system is essential.