| temperature range |
0℃～60℃ |
| Humidity range |
30%～98% RH |
| Saturated drum temperature |
RT+10℃～70℃ |
| Temperature uniformity |
≤2℃ (at no load) |
| Temperature fluctuation |
±0.5℃(at no load) |
| Salt spray deposition |
1～2ml/80 cm².h(16-hour average) |
| heating rate |
0.5℃～1.5℃/min |
| cooling rate |
0.5℃～1.0℃/min |
| Compressed air pressure |
2.00±0.01（kg/cm²） |
| Spraying method |
Continuous/periodic selectable |
| Specimen holder angle |
Can meet 15°, 30° tilt test |
| Test Methods |
NSS test AASS test CASS test |
| Case Material |
PP reinforced rigid plastic sheet or 316 stainless steel |
| Lid Material |
PP reinforced rigid plastic sheet or 316 stainless steel |
| Air-saturated drums |
Imported high-grade stainless steel SUS304 |
| Pressurized Air Hose Material |
High quality rubber hose |
| Other pipelines |
Thickened Fluorosilicone Rubber Tubing |
| Temperature Controller |
Imported “UEC” brand temperature meter |
| Dehumidification and cooling |
Single or double cascade refrigeration |
| Compressor |
Taikang, France |
| temperature sensor |
PT100 platinum resistance temperature measurement body |
| heater |
Titanium Heating Tube |
| interrupter |
Schneider miniature circuit breakers (to prevent short circuits in control circuits) |
| standard configuration |
V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes |
| security protection |
Over-temperature, under-phase/reverse-phase, test timer, fast mist removal indication, test end
Low water level protection, leakage, short circuit, overpressure overload compressor |
| Supply Voltage |
AC380V±10% 50Hz |
| Power |
8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW |
| operating environment |
5℃～＋28℃ ≤85％RH |
Note:
1、 the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard cyclic salt spray corrosion test chamber etc
3、This technical information, subject to change without notice |
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Ventilation Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber New energy battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Tiếng Việt
ภาษาไทย
پاکستانی زبان
